• 목록
• 답변
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser can safeguard your prized property from theft. It's discreet and does not require additional key fobs to operate.

The device uses existing buttons on your vehicle (steering wheel, door panels & centre console) to create a unique, changeable pin code sequence that can be up to 20 presses long. This will allow your vehicle to start.

Simple change of PIN code

Many owners are upgrading their security due to the rising number of vehicle thefts. There are a myriad of security products that are available including tracking systems, immobilisers and alarms. Not all of them are equally effective in protecting your vehicle. While a tracking system may assist in finding your car in the case of theft, it can not prevent the crime from happening in the first place. An immobiliser, on the contrary is exactly what says on the label: it shuts off the engine of your vehicle to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it almost impossible for thieves to steal your vehicle.

The ghost device utilizes the buttons on your car to create a unique sequence that must be entered to allow the engine to start. This can be done via the indicator stalk or window buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the need to use the button sequence. This option is particularly beneficial if you have to give your car away for valet parking or servicing because the immobiliser is activated, but not disabled.

The ghost immobiliser fitter is an unique and innovative device that works with the buttons of your vehicle instead of as a standalone unit. It is not only an effective deterrent to vehicle theft and vandalism, but it can be used on future vehicles you own. This makes it a far better investment than a conventional wheel lock.

Weatherproof tiny device

The Autowatch ghost immobiliser is a sophisticated security system that guards your vehicle from key cloning, hacking and ECU swapping. It's a weatherproof, tiny device that communicates directly with your vehicle's ECU over the CAN data bus to shut down the engine. It can be plugged into the vehicle without the need for extra wiring, and has been thoroughly tested to make sure it is compatible with all vehicles. It is also immune to jamming devices which are a typical method used by car thieves to bypass immobilisers.

The benefit of CAN data over conventional systems is that they operate silently. It can't be detected by sophisticated RF scanning or code-grabbing technology and is also undetectable by traditional diagnostic tools. The Autowatch ghost doesn't produce LED indicators and instead uses the buttons inside your vehicle, such as the steering wheel or centre console panels to create a unique, customizable disarm sequence. You can create a sequence that is up to 20 presses long to increase security. The iPhone app is limited to one connection, and comes with a unique pairing code for the ghost immobiliser installation immobiliser problems (Telegra.ph). All communication between the two devices is secured.

The Ghost also stops thieves from stealing an additional key or replacing the ECU to bypass the immobiliser and start the engine. The engine will only run if a valid PIN code is entered. It is able to be operated temporarily in the Valet/Service mode (with parameters set, such as 30mph speed limit) which means you can give your car to a valet or service without entering the code.

Every vehicle is tested

The Autowatch Ghost is the first aftermarket CAN bus immobiliser that is able to be connected to the wiring of your vehicle and connects to your engine control unit (ECU). The device snoops on electronic signals to disable your car's system from running its normal start-up routine until you input the passcode you have created. The system can be activated or deactivated using your own smartphone app without the need for additional wires.

Standard factory immobilisers in vehicles function by using an electronic transponder in the key that sends an indication to the ECU. If the correct code is sent, the car will start however if the transponder is replaced by one from another vehicle the immobiliser won't recognize it. This enables the vehicle to be stolen and started. A South African company that is at the forefront of vehicle safety systems technology created the Ghost immobiliser. It shields you from key cloning or hacking, and even key theft. The only way that a burglar could steal your vehicle is physically towing it away, and even then they wouldn't be capable of driving it.

bmw x5 ghost installer makes use of buttons in your vehicle, including the indicator stalk, steering wheel, and the door panels, to generate a unique PIN code that needs to be entered to use your car. This is done without the need for additional hardware, such as a key-fob and can be up to 20 presses long. It is also undetectable to diagnostic equipment and doesn't transmit radio frequency signals so thieves are not able to utilize sophisticated RF scanning or code-grabbing technology to detect that a security system has been installed.

Contrary to physical anti-theft devices such as wheel locks or clamps, Ghost is concealed within the vehicle so it can't be disabled or removed by thieves. It's even more difficult to get rid of from a car alarm which requires disarming using the use of a button sequence. This makes it a great addition to an GPS tracking device that can be used to locate your vehicle after it's been stolen.

Override of emergency PIN code

You don't have to look very long on social media sites to find stories or videos about cars that have been stolen with the latest technology tools. This includes key-cloning devices and hacking devices that allow them to start your vehicle without the original keys.

Our Ghost immobiliser fights this and gives you an additional layer of protection to stop your vehicle from being stolen in the event of being targeted by thieves. It creates an individual pin code push sequence from your buttons on the steering wheel, door panel, and the center console. The unique pin code must be entered together with your original key fob in order to stop the vehicle from starting. The unique override pin can be found on a black plastic card that you receive following your installation. It is simple to remember because there aren't any LED indicators.

The device is hidden within the wiring of your vehicle and does not emit radio signals. This means it can't be detected by diagnostic software which can identify what type of security systems you have installed. This makes it an excellent alternative to an electronic device for tracking.

In contrast to other security systems that have a relay in the engine bay, these CANBUS Immobilisers connect with the vehicle's ECU and BCM via the CAN data bus (brand dependant). This allows them to disable the vehicle completely with a digital block of commands to both the ECU and the engine.

These systems can also be linked to a separate alarm, immobiliser or tracker. This should be decided prior to installation. They are also compatible with valet/service modes and is a great alternative to a tracker device when you bring your vehicle to the dealer to address an electrical problem.

Service/Valet Mode

In recent times, there has been an increase in vehicles being stolen without the owners keys. It's now more easy than ever to steal your pride and joy due to the availability of key cloning tools and door lock picks. We have created the Autowatch Ghost Immobiliser to combat this. It stops your vehicle from being driven even if your keys have been copied.

It directly communicates with your car's ECU (Engine Control Unit) through the data loop called CAN. It is completely silent, as it does not use radio frequencies or key fobs. It cannot be detected using diagnostics or any other hacking device. It also stops you from introducing an ECU or key to circumvent the system, as only the PIN code allows the engine to start.

The device is concealed inside your car by using buttons on the steering wheel, centre console & door panels. Before you can begin your vehicle, you must enter a unique and reversible PIN number that is up to 20 numbers.

This is the first aftermarket CAN-bus immobiliser for the market that has been developed. It will stop your vehicle from being started or driven in the event that you do not enter a PIN code before entering. If the device is in armed and you attempt to drive off it will display an indicator on your dash that will flash regularly for around 300m. If you type in your PIN code at this point, it will disarm the anti-hijack device and your car will continue to drive just as normal. If you do not enter your PIN at this time the indication will continue to flash and will require a new PIN code for every attempt to start your vehicle.